Support

Film capacitors are electronic components that store electrical charge and energy in the form of an electric field between two metal plates separated by a dielectric film. They are commonly used in a variety of electronic circuits, including power supplies, filters, and signal processing circuits.To ensure the proper operation and longevity of film capacitors, it is important to take certain precautions when using them.

2023-03-29

An AC motor needs a start capacitor to provide the initial burst of energy needed to start the motor's rotation. When an AC motor is first turned on, it needs an extra jolt of electricity to overcome the inertia and get the motor turning. Without this initial burst of energy, the motor might not be able to start at all, or it may take a long time to get up to speed. A start capacitor helps to provide this initial burst of energy by storing electrical energy and then releasing it in a powerful surge when the motor is first turned on. Once the motor is up to speed, the start capacitor is no longer needed, and it is automatically disconnected from the circuit.

2023-03-24

Metallized polyester film capacitor is a type of electronic capacitor that is commonly used in various electronic circuits. It consists of a thin polyester film, which is coated with a thin layer of metal, typically aluminum, on one or both sides. This metallization process forms two electrodes that are separated by the dielectric film.

2023-03-16

Selecting a water-cooled resonant capacitor involves considering several factors, such as the operating frequency, power rating, voltage rating, cooling requirements, and physical size constraints.

2023-03-13

An axial film capacitor is a type of capacitor that consists of two conductive electrodes separated by a thin insulating film, wound in a cylindrical shape with the leads extending from both ends of the cylinder. The insulating film can be made of various materials such as polyester, polystyrene, or polypropylene. Axial film capacitors are commonly used in electronic circuits as they have a low leakage current and high tolerance for temperature and frequency variations.

2023-03-10

A plastic film capacitor is a type of capacitor that uses a thin plastic film as the dielectric material between its two conducting plates. The plastic film is usually made of materials like polyester (PET), polypropylene (PP), polystyrene (PS), or polyethylene (PE).

2023-03-10

IGBT (Insulated Gate Bipolar Transistor) snubber capacitors are used to reduce the voltage and current spikes caused by switching operations in power electronics applications. Proper selection of these capacitors is essential for the reliable and efficient operation of IGBT-based systems

2023-03-10

A metallized polyester film capacitor is an electronic component that is commonly used in a wide range of electrical and electronic circuits. It is made up of a thin layer of polyester film that is coated with a metal layer, usually aluminum, on both sides. The metal layers act as electrodes, which are connected to the leads of the capacitor.

2023-03-09

A coupling capacitor is a capacitor used to pass AC signals while blocking DC signals. It is used to connect two circuits so that the AC signal from one circuit can be transferred to the other circuit without any DC voltage being transferred. A bypass capacitor is a capacitor used to shunt unwanted AC signals to ground. It is used to provide a low-impedance path for AC signals while blocking DC signals.

2023-03-08

Snubber capacitors are electronic components used in power circuits to suppress voltage spikes and transients that occur when switching on or off power devices such as transistors, diodes, or thyristors. These voltage spikes and transients can damage the power device, cause electromagnetic interference, and reduce the efficiency of the circuit.

2023-03-08

Capacitance is a measure of a capacitor's ability to store electrical charge. It is defined as the ratio of the electric charge on each of the capacitor's plates to the voltage difference between the plates.

2023-03-06

Film capacitors have a wide range of applications across various industries, and their versatility, reliability, and affordability make them a popular choice for many different electronic devices and systems. Here are a few potential future applications for film capacitors:

2023-03-03

This paper mainly is to introduce the difference between decoupling, bypass and coupling capacitors.

2022-12-26

This paper is to tell you serveral important points about the metallized polyester film capacitors.

2022-12-26

This paper is to tell you the reason that why does an AC motor need a start capacitor? It includes the introduction of AC motor and start capacitor.

2022-12-26

This paper is to introduce one of the electronic components which is called filter capacitor. Full complete and detailed information for the filter capacitors.

2022-12-26

This paper is to analyse the characteristics, functions and applications of the film capacitors.

2022-12-26

What Is A Capacitor?

2022-12-23

A DC link is a connection which connects a rectifier and an inverter. These links are found in converter circuits and in VFD circuits. The AC supply of a specific frequency is converted into DC. This DC, in turn, is converted into AC voltage.

2022-12-23

Arc welding is a welding process that is used to join metal to metal by creating enough heat from an arc that is generated and sustained by an electric current, and the melted metals, when cool, result in a binding of the metals. It is a type of welding that uses a welding power supply to create an electric arc between a metal stick ("electrode") and the base material to melt the metals at the point of contact. Arc welders can use either direct (DC) or alternating (AC) current, and consumable or non-consumable electrodes.

2022-12-23